Roof Anchor Points

About Roof Anchor Points

When you need anchor systems installed at your site in Sydney, you can trust our qualified technicians to get the job done safely and efficiently. Anchor Point Safety offers full system installation services which are carried out by fully qualified and insured experts. All of our fixed and temporary systems comply with the National Code of Practice for safe working on roofs and with AS/NZS 1891.4:2009.

We also have a range of self-installation anchor point products available, such as the rafter and truss kit, which is our most popular self-in.

Roof Anchors

UNIPLATE ANCHOR – UNI-01

The uniplate anchor has been designed to fit most metal roof profiles. The uniplate can be fitted with either a fixed eyelet or an energy absorbing swivel eyelet. The swivel eyelet allows the attachment rope to follow you, allowing complete directional force. The eyelet is secured using a separate locking (Nylok) nut.

C&Z PURLIN ANCHOR – C&Z-00

This is the simplest anchor point and our most popular. It has minimal impact on roof aesthetics, while its sophisticated design ensures the safety of the user. Its multiple compression points allow the small unit to have maximum strength.

Overview

Designed and manufactured by Anchor Point Safety Pty Ltd, this product features our energy-absorbing component, which increases performance by over 15% and is designed to suit C and Z metal purlins.

Benefits

The shaft bends
The shaft cover crushes
The bottom EAC ring collapses
The bracket distorts
The shaft turns in the direction of pull under extreme pressure
The shaft cannot unwind in either direction

Application

On any roof that structurally uses C & Z purlins

Specifications

A combination of stainless steel and aluminium to ensure its environmental survival. It also allows for strength in the unit and dampening to protect the user and roof.

C&Z RETRO – TRIMDEK – RET-01

This unit is designed with a combination of stainless steel and aluminium, which gives it both strength and flexibility. The unit is designed to flex and collapse in the event of a fall to reduce the impact to the operator and structure.

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Overview

Designed and manufactured by Anchor Point Safety, this unit features energy absorbing components to reduce the impact on operator and roof in the event of a fall.

Benefits

There are unique safety features in this anchor including:
The shaft bends
The shaft cover crushes

Application

The anchor can be installed on existing and new buildings and is fitted after the roof sheeting has been secured. Designed to fit Trimdek style roof sheeting.

Specifications

The eyelet is M12 stainless steel 316 grade
Retaining disc and block nut are 304 grade stainless steel
Engineering certificate No 129006

C&Z RETRO – CORRUGATED – RET-01

This unit is designed with a combination of stainless steel and aluminium, which give it both strength and flexibility. The unit is designed to flex and collapse in the event of a fall to reduce the impact to the operator and structure.

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Overview

Designed and manufactured by Anchor Point Safety, this unit features energy absorbing components to reduce the impact on the operator and roof in the event of a fall.

Benefits

There are unique safety features in this anchor:
The shaft bends
The shaft cover crushes

Application

The anchor can be installed on existing and new buildings, and is fitted after the roof sheeting has been secured
Designed to fit corrugated roof sheeting

Specifications

The eyelet is M12 stainless steel 316 grade
Retaining disc and block nut are 304-grade stainless steel
Engineering certificate No 129006

C&Z RETRO – KLIPLOCK – RET-01

The unit is designed with a combination of stainless steel and aluminium, which give it both strength and flexibility. The unit is designed to flex and collapse in the event of a fall to reduce the impact to the operator and structure.

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Overview

Designed and manufactured by Anchor Point Safety, this unit features energy-absorbing components to reduce the impact on operator and roof in the event of a fall.

Benefits

There are unique safety features in this anchor including:
The shaft bends
The shaft cover crushes

Application

The anchor can be installed on existing and new buildings and is fitted after the roof sheeting has been secured.

Specifications

The eyelet is M12 stainless steel 316 grade
Retaining disc and block nut are 304-grade stainless steel
Engineering certificate No 129006

MINI SURFACE MOUNT – SPANDEK 112MM – MSMS-01

The eyelet is secured using a separate locking (Nylok) nut. This separation of the fixing mechanism prevents metal fatigue when over tightened or twisted under load and allows the eyelet to rotate under pressure.

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Overview

Specially designed for situations where you can’t access the inside of the roof, this unit is secure because it dissipates the force of a fall over a wide region and still meets all Australian standards.

Benefits

The major components are stainless steel, so they’ll last even in the toughest conditions
Can be used in applications where roof access isn’t possible
Low profile – minimal visual impact for architecture aesthetics

Application

This anchor is best suited to Spandek type roofs of 112mm. It’s not suitable for Kliplok or corrugated roofs.

Specifications

The eye is 316 grade S/S
Waterproofing is achieved by composite flashing and/or Sikaflex construction sealant
Fall arrest anchor for a single operator (12kn) in accordance with Australian Standards 1891 1-4 2009
Anchor can be used for two operators (22kn) depending on the underlying structure’s dimensions and ability to take the extra imposed load; seek engineering and/or certified independent advice for this rating (22kn)
Testing has been performed by NATA test teams and product developed in conjunction with structural engineers.

MINI SURFACE MOUNT – SPANDEK 128MM – MSMS-02

Overview

Specially designed for situations where you can’t access the inside of the roof, the unit is secure because it dissipates the force of a fall over a wide region and still meets all Australian standards.

Benefits

Application

This anchor is best suited to Spandek type roofs of 128mm. It’s not suitable for Kliplok or corrugated roofs.

Note: prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Specifications

MINI SURFACE MOUNT – UNIVERSAL EYELET – MSM-04

Single piece stainless steel unit that is secured to the roof using 7 x 8mm trifold rivets.

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Overview

Specially designed for situations where you can’t access the inside of the roof, the unit is secure because it dissipates the force of a fall over a wide region and still meets the Australian Standards.

Benefits

Application

The anchor may be used on most metal roofing.

Specifications

The eye is 316 grade S/S
Waterproofing is achieved by composite flashing and/or Sikaflex construction sealant
Fall arrest anchor for a single operator (12kn) in accordance with Australian Standards 1891 1-4 2009
Anchor can be used for two operators (22kn) depending on the underlying structure’s dimensions and ability to take the extra imposed load; seek engineering and/or certified independent advice For this rating (22kn)
Testing has been performed by NATA test teams and product developed in conjunction with structural engineers

Timber and Truss

RAFTER AND TRUSS – ANCHOR – R&T-01

Designed to clamp onto a rafter or truss, this product ensures that the integrity of the structure is maintained while providing excellent fall protection.

Overview

For use on timber frame roofs, this anchor is specially designed to protect the user without compromising the roof strength.

Benefits

Can be bolted directly on to Rafter & Truss.

Application

For use on timber frame roofs.

Specifications

There are five unique safety features in this anchor including:
The shaft bends
The shaft cover crushes
The bottom EAC ring collapses
The bracket distorts
The shaft under extreme pressure turns in the direction of pull

Tile Roofs

SURFACE MOUNT ANCHORS – LARGE KLIPLOCK – LSMK-01

This stainless steel construction is designed and manufactured by Anchor Point Safety Pty Ltd. It is specifically designed for strength and to reduce dynamic forces on both operator and structure

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure it is in a sound condition.

Overview

This is a large roof anchor designed to protect against heavy falls of up to 21kn. As a surface mount anchor, it is ideal for situations where roof structure access isn’t possible.

Benefits

Protects against higher rated falls, up to 21kn.

Application

The anchor can be installed on existing and new buildings and is fitted after the roof sheeting has been secured

Designed to fit Kliplock style roof sheeting

Specifications

The eye is 316 grade S/S and the 12 mm shaft is 304 stainless steel
The retaining brackets are stainless steel
The shaft is secured using a separate locking (Nylok) nut and backing washer – this separation of the fixing mechanism prevents metal fatigue when over tightened or twisted under load and allows the eyelet to rotate under pressure
Waterproofing is achieved by composite flashing and/or urethane construction sealant
Fall arrest anchor for a single operator (to 21kn) in accordance with Australian Standards 1891 1-4
Anchor can be used for two operators (22kn) depending on the underlying structure’s dimensions and ability to take the extra imposed load; seek engineering and or certified independent advice for this rating (22kn)

UNIPLATE ANCHOR – UNI-01

MINI SURFACE MOUNT – CORRUGATED – MSM-01

The low profile surface mounted roof anchor MSM-01 is designed to suit corrugated roof sheeting and can be fitted with either a fixed or swivel eyelet with the swivel eyelet allowing the attachment rope to follow you allowing for complete directional force. This separation of the fixing mechanism prevents metal fatigue when over tightened or twisted under load and allows the eyelet to rotate under pressure.

Overview

Specially designed for situations where you can’t access the inside of the roof, this unit is secure because it dissipates the force of a fall over a wide region and still meets the Australian Standards.

Benefits

Application

The anchor is designed for corrugated sheeting.

SURFACE MOUNT ANCHORS - LARGE CORRUGATED - LSMC-01

This stainless steel construction is designed and manufactured by Anchor Point Safety Pty Ltd. It is specifically designed for strength and to reduce dynamic forces on both operator and structure

Note: Prior to fitting, a Structural Engineer should check the structure of the building to ensure it is in a sound condition.

Overview

This is a large roof anchor designed to protect against heavy falls of up to 21kn. As a surface mount anchor, it is ideal for situations where roof structure access isn’t possible.

Benefits

Protects against higher rated falls, up to 21kn.

Application

Tested to Australian and New Zealand Standard AS/NZS 1891.4
Suitable where you are unable to access the inside of a roof

Specifications

FIRST ATTACHMENT LINE - FAL-01

An intermediate anchor that is used to protect the user when dismounting from a ladder ensures that the user is protected at all times, particularly at a moment when secure contact with safety equipment is restricted.

Overview

Used as the first point of attachment on a rooftop before leaving a ladder, this line ensures 100% attachment whilst at height. In a case of a fall, it allows for access back to the ladder.

Benefits

This ensures the user is protected from a fall between dismounting a ladder and attaching to the primary roof anchors.

Application

Designed for all roofs and is essential to maintain complete safety coverage on a roof

Specifications

The unit is a full stainless steel construction that ensures it maintains its strength in even the harshest environmental conditions
Fall arrest anchor for a single operator (12kn) in accordance with Australian Standards 1891 1-4 2009
The unit comes in custom lengths so it fits exactly with the requirements of your specific roof application

HEAVY DUTY ANCHOR – HDA-02

This allows users to abseil on the side of buildings. The twin pin design allows for increased weight, which is important in commercial applications where users carry extra equipment.

Overview

This is a large roof anchor designed to protect against heavy falls of up to 21kn. As a surface mount anchor, it is ideal for situations where roof structure access isn’t possible.

Benefits

Protects against higher rated falls, up to 21kn.

Application

Tested to Australian and New Zealand Standard AS/NZS 1891.4
Suitable where you are unable to access the inside of a roof

Specifications

MINI SURFACE MOUNT - KLIPLOCK - MSMK-01

Note: Prior to fitting, a Structural Engineer should check structure of the building to ensure in a sound condition.

Overview

Used as the first point of attachment on a rooftop before leaving a ladder, this line ensures 100% attachment whilst at height. In a case of a fall, it allows for access back to the ladder.

Benefits

This ensures the user is protected from a fall between dismounting a ladder and attaching to the primary roof anchors.

Application

Designed for all roofs and is essential to maintain complete safety coverage on a roof

Specifications

Concrete Roofs

ANCHOR INTO CONCRETE – CON-01

The anchor can be mounted into the surface using a chemical mixture or mechanical bolt.

Note: All concrete anchors MUST be load tested before operation.

Overview

This anchor is suitable for installation into concrete and masonry (core filled). They can be chemically or mechanically fitted however must be load tested as per Australian Standard 1891. 2009. Used as a Fall Arrest anchor and an anchor for Industrial rope access.

Timber Roofs

RAFTER AND TRUSS ANCHOR TEE-01

This product uses a specially engineered mounting unit that’s designed to bend and reduce the impact on the timber frame. This allows for higher limited free fall force than the roof would otherwise be able to handle.

Overview

For use on timber frame roofs, this anchor is specially designed to protect the user without compromising the roof strength.

Benefits

Can be bolted directly on to Rafter & Truss
High fall protection rating despite reduced load bearing of timber frame roof

Application

For timber framed roofs.

Specifications

Designed to suit Rafter & Truss
EAC bracket flange distorts
Stainless steel construction with aluminium shaft cover
Aluminium cover crushes to slow shaft bending and reduce impact
Flashing with mini boot to seal unit and ensure roof waterproof sealing

"I operate a sign company and required some roof anchors to be installed so we could safely install a sign. Anchor Point Safety assisted us with this process, they were professional and safety conscious in their installation processes and we were able to complete our project safely. I would happily recommend Anchor Point Safety for anyone in the market for harness and access systems."

Andy Crosthwaite - Google Review

We are locally owned and operated

Our safety products are designed and engineered to meet Australian standards.

Anchor Point Safety

Head Office

New South Wales

Unit 4/3 Naples Place

Wyong, NSW 2259

1800 007 454
admin@anchorpointsafety.com.au